Category Archives: In the Shop

Step by Step Custom Breyer Remake (Mendhi-Classic Rearing Stallion)

Standard

Today I began working on a remake of a classic sized Breyer in the Rearing Stallion mold.  Here he is before: Image Unfortunately he came to me with a broken tail.  Breaks on any Breyer can be tricky to fix.  Before taking on that task, first I went ahead and sanded him down. Image and then pieced together and primed Image Check out my sweet puppy Ruf-Ruf posing for ya there in the background :). At this point, I kinda forgot to keep up with all of the picture taking, but I think I can talk you through it.. Image I started out with a translucent yellow base, but looking at it I decided that it was too, well, yellow. So, I thought that I might try to go for a sunset effect by adding on translucent red while the yellow was still wet. Didn’t quite work out the way I would have liked.  He mostly just turned out yellow and red instead of the nice red-orange-yellow fade I had hoped for, so I added another coat of yellow on top. Image Again, not what I was going for. And then came a sudden rain shower, which forced me to pick up my wet horse and move him inside to dry. Well, you can imagine that this did not go well at all. I’ve had my eyes open for a lazy susan to make painting in the round more easy, but I haven’t found one yet. Today’s experience has let me know that maybe I need to put my horse on an old plate or something if I am painting outside so that I don’t have to actually handle them in the event of sudden downpours, and the like.  As you may have guessed, 3 coats of wet paint + fingers = mess!  Still, since I do not believe in accidents, I decided to just go with it.  I got out my fine sandpaper and proceeded to give him a distressed look that, end the end, I liked very much.  It reminded me of some kind of ancient artifact…an old temple idol… Following this line of thinking, I dug out some old temporary tattoos that I’ve had for ages. Image I was pretty sure I would be able to apply the temporary tattoos to the model.  I’d never actually done it before, but I had tried using rub-ons on my test model, and usually rub-ons and temp tattoos can be used on the same surfaces, so I decided to give it a go.  Fortunately, it worked out really well and I was pleased with the results.  However, I only had a couple of good tattoos for the model.  I went back to the store to see I could get some similar ones, but I only found rock n roll and hippie tats….Plan B?  I dug out my charcoal Sakura glaze pen and drew the rest of them in myself. It took about 2 hours and nearly the entire contents of my pen to cover the whole body, but I was generally pleased with the result. ImageImage As soon as all of the ink was dry I sprayed him down with a couple coats of sealer to keep it from smudging. Later, I added black points on him and finished him off with a dab of translucent metallic gold, red and turquoise, just to him a little extra sparkle. Image Ta-Da! Thanks for visiting!

Breyer Remake-Start to Finish (Appaloosa Mare)

Standard

So I thought it might be fun to do a post showing the process of doing a Breyer remake from start to finish.

First I select a model.  For this project I will be using an Appaloosa Mare.

Image

Some people remake horses that are brand new, fresh out of the box. I do not. I always work on a “scratch and dent” model that I picked up at a thrift store, flea market, yard sale etc.  I only work on models that are no longer in collectible condition.

The next step is to sand it down and get it ready for refinishing.

Image

Next, no matter what color I plan to paint the horse, I always start with a layer of white primer.  This helps me to see the “bones” of a horse, as well as any hidden imperfections in the body. This is also the point where I usually get some inspiration for what the final product will look like.

Image

Image

As you can see, this horse has several deep gouges on its neck sides. In cases like this, I will give the horse a distressed paint job to camouflage the flaws and use them to their advantage. This time I will be using a dish soap resist.

IMG_0777[1]

I decided I wanted a black base. Then I applied dish soap bubbles to the wet paint to give a nice random, splotchy effect.  Snowflake appaloosa anyone?

IMG_0778[1] IMG_0779[1]

After the paint was (mostly) dry, I went in and added a glossy black to the face, tail, and legs to blend the body paint in with the rest of the horse. I liked it like this, but I also felt that it needed a little more..pizzaz…..color.

IMG_0782[1] IMG_0783[1] IMG_0784[1]

I decided to go with a translucent blue over the spots so that they would still be visible, but not quite as stark as the black and white version.  All she needed then was a coat of finishing spray so that everything stays put. And that’s it..done!  Here’s a quick before and after just for a recap.

IMG_0772[1] IMG_0782[1]

Thanks for looking! Check back for more Breyer remakes in progress!!!

New Addition to the Shop: Moonstruck

Standard

New pony in my shop! Check him out…

I call him “Moonstruck”

IMG_0763[1]

He is made in the Five Gaiter mold.  Does he look a little familiar? Maybe it’s because he was in my shop before with a different paint job. Unfortunately he took a flying leap off the shelf and really dinged the paint up bad. Fortunately, the body wasn’t damaged in any way. However, his original paint job just did not want to come off. It kept gumming up on me. It literally took hours to strip him down a refinish him.  Six coats of gesso/primer later I was able to start working on him again.

He has a blue base coat with layers of metallic blue, greens, and golds and the final finish is a combination of distressed and metallic. Definitely a one of a kind!